Change a Propane Tank
Forklifts powered by propane are common inside warehouse environments. These forklifts have a propane mount located at the rear of the operator. These tanks need to be replaced periodically since they have limited lifespans. Drivers of forklifts should utilize care when handling propane tanks. Compressed gases are really dangerous, specially since the gas is flammable. Utilize caution when removing and replacing propane tank to prevent injury.
1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn the tank valve off. The forklift must be left on until the engine dies. This procedure burns off the gas inside the transfer hose that connects the engine and the tank. Prior to taking the next steps, wear the correct safety equipment, such as insulated gloves made of either neoprene or leather. It is essential for you to protect your skin from contact with the compressed gas, which is extremely cold.
2 The tank hose has to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, reconnect the holding straps and reconnect the hose at the valve of the tank by tightening the nut.
3 You could check for leaks by applying soapy water to the valve and opening it slightly. Leaking gas would cause bubbles to froth around the value. If this happens, inspect the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks in the area of the valve, and after that do the leak inspection procedure once more. Persistent leaks mean that both the nut and connecting hose would need to be replaced. Nonetheless, if replacing the hose and nut still does not stop the leak, the tank must be replaced.
4 Open the valve all the way to allow the gas to fill the connecting hose. After that you can start the forklift and resume operating.