Forklift Battery Safe Installation and Charging
Batteries used in forklifts are pricey pieces of machinery which are pretty large weighing many pounds. The task of installing and charging these batteries is something that must be planned out ahead of time in order to make sure that these procedures are able to be completed properly and safely. Maintaining a sound charging procedure and correct handling could really increase the standard lifespan of a battery.
Standard Charging
It is suggested that the battery is not connected to the charger until it is at or lower than 20 percent capacity. By charging the battery when it is more than 20%, the battery's lifespan can actually be shortened. On around each 5th charge cycle, the charger must be set on the weekend or equalize setting, depending on what type of charger you are utilizing.
The cycle of charging must not get interrupted. You must avoid utilizing the battery for several hours once the charge cycle is complete. By practicing these procedures, you could help make certain that you get the maximum battery performance available.
Charger Maintenance
Make certain the charger is turned off prior to hooking up the battery to the charger. You then can connect the charger to the battery. This is a common error which can inadvertently cause damage to both the charger and the forklift. It is also really essential that the battery amperage must match that of the charger.
The battery must never be allowed to to deep discharge or to completely discharge. This would ultimately shorten the lift of the battery and can even prevent the charger from being able to activate. If the battery charger reads that there is no activity in the battery, it will not start the charge cycle. If this situation occurs, a technician will need to be called in order to re-set the charger prior to charge being able to begin.