In the majority of cases, most people spend quite a lot of money purchasing their forklift. Therefore, it is extremely important to take proper care of it in order to protect your investment well into the long run. It is really a great idea to know the procedures that are undertaken during the maintenance and care of this piece of equipment.
Amongst the best ways to tell how good the engine is running is by starting the forklift up and listening closely to see how it works. For instance, if there are any misses or knocks, the machinery is defective and this should raise several concerns. Also listen closely for any squealing noise which come from the belts as these noises would provide you with a wealth of information.
When carrying out maintenance, several of the main components you will need to pay attention to comprise the safety warning devices, horn, the lights, the gauges and the overhead guard. Any faulty parts or burnt out light bulbs need to be replaced as soon as they are noticed. It is also vital to inspect the wiring.
After the above parts have been checked carefully, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Each and every cell of the battery has to be checked in order to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machinery and then change the filters. The hydraulic filter, the transmission filter and the fuel filters must be regularly replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
When the oil change is done and the filters have been replaced, a visual inspection of the drive axle needs to be carried out. If there is a grease fitting on the axle make sure to apply some grease. Inspect the engine belts for any frays or cracks. If you find any, fix the issue accordingly. Afterwards, inspect each and every other part of the machinery including the wheels. If any type of fault or concern is detected, be sure to deal with it immediately in order to make sure the equipment is working at its safest and optimum levels.